KT&C KPT-SPDN120HD - Manual (Page 18)

3. Program and Operation
3.3.2 Reboot
Reboot the system if there are some anomalous problems to control or operate the domes.
Rebooting the system will recycle power of dome and camera without changing settings of dome.
- Enter into {Main Menu}
- Select {System) using joystick and move to {Reboot} in the sub menu of {System}
- To {Reboot} the system, Press [Near] key.
- To cancel Reboot, Press [Far] key.
3.3.3 Initialize
Use this function to initialize all or specific parameters of dome to factory default parameters.
- Enter into {Main Menu}
- Select {System} using joystick [▶] and move to {Initialize} in the sub menu of {System}
- Select items to be initialized.
- Press [Near] button or use joystick [▶] to select {Clear}
- Press [Far] button or use joystick [▶] to return to previous menu (back).
[ALL]: Clear All saved items (CAM / PRESET / TOUR / PATTERN / SCAN)
[CAM]: Clear Camera related settings.
[PRESET]: Clear saved presets. (To clear each preset, refer to PRESET Menu)
[TOUR]: Clear saved Tours.
[PATTERN]: Clear saved Patterns.
[SCAN]: Clear saved Scan items.
[ETC]: Clear other setting value except items of Camera & PTZs
(CAM status and saved data of PRESET, TOUR, PATTERN and SCAN)
18
REBOOT
CONTINUE?
YES : NEAR
NO : FAR
INITIALIZE
ALL : NO CLR
CAM : NO CLR
PRESET : NO CLR
TOUR : NO CLR
PATTERN : NO CLR
SCAN : NO CLR
ETC : NO CLR
SAVE : OPEN
BACK : CLOSE