KT&C KVR-0412H - Manual (Page 210)

210
13.4.6 System Dimension Diagram
13.4.7 Connector Wiring
13.4.7.1 4 In / 1 Out Analog to HD-SDI Connection
 Connect 4 ‘VIDEO OUT’ of Analog device to each of 4 ‘VIDEO IN’ of HSC 2410 using 75ohm coaxial cables.
 Connect a ‘HD-SDI OUT’ of HSC 2410 to ‘HD-SDI IN’ of the HD-SDI DVR using 75ohm coaxial cable.
13.4.7.2 Power Supply Connection
 Plug the power supply adapter (DC 12V, 3.33A) which is included in this product to ’DC12V’ connector and plug another side
to power source and Input voltage is a free volt (100 VAC ~ 240 VAC).
13.4.8 Cable
 75 ohm coaxial cable
NOTE
The cable above is not included in the package.