KT&C KVR-0412H - Manual (Page 35)

35
 Export: Store the Menu setup of DVR in USB memory stick. Please plug in the memory stick and then click ( ) Export.
 When user is on Default, Import or Export process, a message box will ask the progress and click the confirmation icon, then
a message box will show whether its success or failure.
System Log
 Export: Store the System Log contents in USB memory stick. Please plug in the memory stick and then click ( ) Export.
 When user is on Default, Import or Export process, a message box will ask to proceed and click the confirmation icon, then a
message box will show whether its success or fail.
 When user complete Status data input, please click ( ) Version and the following screen will appear.
Version Upgrade
 User may upgrade DVR software.
 Please follow the Upgrade procedure below.
① Plug USB memory stick having upgrade file into DVR.
② Click ( ) Load frame. Then, software version stored in the USB will appear on the left-hand side.
③ Click ( ) Start frame to start the upgrade.
④ When the upgrade is completed, a dialogue box pops up. Please choose ‘OK’ and DVR will auto-reboot.
NOTE
Upgrade file must be placed without folder. Otherwise SYSTEM will not be able to recognize the file.
CAUTION
DO NOT UPGRADE UNTIL A HARD DISK DRIVE IS INSTALLED. MAKE SURE TO UPGRADE WHEN HDD IS IN PROPER OPERATION.
CAUTION
PLUGGING OUT USB DEVICE OR FORCED POWER-OFF DURING VERSION UPGRADE MAY CAUSE PERMANENT DAMAGE.
CAUTION
REMOTE UPGRADING WILL CAUSE SYSTEM TO CHANGE ALL THE SETTINGS TO DEFAULT EXCEPT NETWORK SETTING.
Version