KT&C KVR-0412H - Manual (Page 34)

34
4.2 SYSTEM
4.2.1 Information
 Please click ( ) SYSTEM>Information and the following screen will appear.
Site Description
 Decide on a name of DVR.
 Please click ( ) keyboard icon on Site Description frame and the following virtual keyboard will appear.
 Please click ( ) desired letters (characters) on the virtual keyboard to input.
① Use to erase one character every time.
② Use to erase the whole sentence.
 Please choose ‘OK’ to confirm the input and choose ‘Cancel’ to cancel.
System ID
 Control DVRs by one remote controller by setting DVR IDs.
 Please click ( ) ▲, ▼ direction keys on the right-hand side of the System ID frame to set the ID of DVR. Take any whole
number between 1 and 255.
 While pressing (+) or (-) button, the System ID value increases or decreases by 10 units.
Language
 Please click ( ) Language frame to choose desired language and press ( ) key again.
Setup
 Default: Click ( ) Default frame to restore all setup values of menus to factory default settings. Please note that System Log
is not initialized.
NOTE
This has a different function from Factory Reset Switch on the back panel of DVR in that System Log is not initialized.
 Import: Copy the Menu setup stored in USB memory stick into DVR. Please plug in the memory stick and then click ( )
Import.
Status