KT&C KVR-0412H - Manual (Page 61)

61
H Type
360x240 (360x288) 720x240 (720x288) 720x480 (720x576) 1280 x 720 1920 x 1080
4 Channel DVR Max. 30 fps per Channel Max. 30 fps per Channel Max. 30 fps per Channel Max. 30 fps per Channel Max. 30 fps per Channel
I Type
 Analog Input (CH 1 ~ 4)
NTSC(PAL) 360x240 (360x288) 720x240 (720x288) 720x480 (720x576) 960x480 (960x576)
4 Channel 120 (100) 120 (100) 120 (100) 120 (100)
 HD-SDI Input (CH 5 ~ 8)
360x 240(288) 720x240(288) 720x480(576) 1280 x 720 1920 x 1080
4 Channel SDI Max. 30 fps per Channel Max. 30 fps per Channel Max. 30 fps per Channel Max. 30 fps per Channel Max. 30 fps per Channel
 Click ( ) each frame on ‘Quality’ column to select recording quality of a corresponding camera. User may select its
recording quality from Super, High, Std and Low.
 Click ( ) each frame on ‘Duration’ column to select recording duration (i.e., 10 second ~ 10 minute) of a corresponding
camera.
 User may change the setting values of Resolution, Frames, Quality and Duration at a time by clicking the menu tab.
 Choose ‘OK’ to confirm the setting.
NOTE
E, F, G, H and I Type DVR can detect 1080i, 1080p or 720p HD-SDI signals. If user connected Camera before the booting, each
signal is automatically detected and recognized (Auto Detection).
CAUTION
IF USER CONNECTS DIFFERENT TYPES OF HD-SDI SIGNALS WHILE DVR IS OPERATING. IT MAY CAUSE MALFUNCTIONS OF DVR.
4.5.4 Motion Detection
 Please click ( ) RECORD>Motion Detection and the following screen will appear.
 The Motion Detection menu will allow user to set Motion detection alarm.
 Press SETUP key (or right mouse button) and the SETUP menu will appear.
 SETUP menu descriptions.
- Camera: select camera for setup.
- Sensitivity: select sensitivity (Low, Normal and High)
- Reverse Vert: activate the entire column at the cursor’s position.
- Reverse Horz: activate the entire row at the cursor’s position.
- Select All: active all blocks.
- Deselect All: deactivate all blocks.
- Copy to All Cameras: The present channel setup applies to all other cameras. Only when click save button, the changed
setup can be saved.
- Save: save the new settings and go back to previous menu (page).
- Exit: ignore the new settings and go back to previous menu (page).
- Cancel: cancel Motion Setup menu.
 Choose ‘OK’ to confirm the setting.