KT&C KVR-0412H - Manual (Page 90)

90
 Click “File” Tab to continue to set up the E-map.
 Type a name of E-map when you finish map setting in “New” menu.
 Click “new” to add a new location in Location list. If the other location is already saved, then select the location from the list.
 Select type among Outdoor, Floor, and Room.
- Users can set up the hierarchical E-map in their taste.
- For example, after setting up the floor map, room maps are added under the floor map.
 DVR Name: Select the specific DVR from the list to connect E-map.
 Users are able to check the E-map and its hierarchical structure from the “Registered E-map list”.
- Here, users are able to load the map, delete the map and show map viewer by clicking mouse right button on the map list.
 Click “Save” to save and exit.
6.4.6 Remote Device Setup
 Select one among the connected devices and click “OK”.
 Then the setup window appears same as the one in the DVR.
 Click “OK” to save and exit
NOTE
Some settings cannot be modified remotely.