Cleveland Motion Controls ULTRA ISC SERIES SLIM CELL TRANSDUCER REV AA - Manual (Page 12)

U LTRA ISC S ERIES S LIM C ELL T RANSDUCER MAN-70434-0 R EV AA
1.8 O PERATING C ONDITIONS
Condition Isolated Signal Conditioning Amplifier
Installation category Category III
Pollution Pollution Degree 2
Input supply Earth (Ground) referenced
Protection Enclosure mounted
1.9 EMC T ECHNICAL R ATINGS
Port Phenomenon Test Standard Level From Test Standard
Enclosure ESD EN 61000-4-2: 8KV AD, 1KV CD EN 61326:1997
Enclosure RF Field EN 61000-4-3 10V/m,1 Khz AM EN 61326:1997
Output Leads
Fast
Transient
Burst
EN 61000-4-4 1kV EN 61326:1997
DC Supply
Leads
Fast
Transient
Burst
EN 61000-4-4 1kV EN 61326:1997
DC Supply
Leads Conducted
Immunity
EN 61000-4-6 3V/m EN 61326:1997
Output Leads
Conducted
Immunity
EN 61000-4-6 3V/m EN 61326:1997
1.10 E MISSION SPECIFICATIONS
Port Phenomenon Test Standard Level Generic Standard
Enclosure Radiated EN 61326:
1997
Class A EN 61326:1997
The levels of performance indicated are achieved when the Isolated Signal Conditioning Amplifier is
installed by using the instructions and specifications outlined in this document.
1.11 S PECIFICATIONS
Item: Specification:
Transducer Weight
Slim Cell 1 Slim Cell 2
2.8 lbs.
1.3 kg
6.6 lb.
3.0 kg.
Weight + Bracket
Slim Cell 1 Slim Cell 2
5.5 lbs.
2.5 kg.
11.6 lb.
5.3 kg.
Material Body and Side Plates – Stainless Steel 410
Bridge Resistance 135-147 Ohms @ 20 o C
Gage Type Semi-conductor strain gage, gage factor equals 95 (nominal)
Excitation Voltage 5.6 VDC maximum
(Excess voltage can cause permanent damage)
Nominal Output Signal at Rated
MWF
+/- 100 mV per Transducer (with 5 VDC excitation voltage)
P AGE 12 OF 42