Andrew ATC200-Lite - Manual (Page 33)

Bulletin 639510 May 2005 5-1
Section 5
Device Configuration
After new devices are found and addressed in the ATC200-Lite program, each device is ready
to be configured. New devices, that have never been configured before, will display the status
as ‘Not Configured’ in the ‘Device Information’ list.
1. To begin device configuration, click on the device to be configured (Figure 5-1).
2. Click on ‘Edit Selected’ to open the ‘Device Configuration’ screen (Figures 5-1 and 5-2).
Figure 5-1. Selecting Device to be Configured.
1. Click on device to be configured.
2. Click ‘Edit Selected’.