Andrew ATC200-Lite - Manual (Page 44)

Section 7–Changing the Electrical Downtilt-Group ATC200-Lite Teletilt ® Remote Control Downtilt System
7-2 May 2005 Bulletin 639510
Other devices that have the same sector ID, minimum tilt, and maximum tilt are listed in
the box labeled ‘Additional Compatible Antennas’. The devices in this box may be included
in the move by moving one or more of them from this box to the box on the left.
4. To help determine if additional antennas could be included in the group move, click on
each model to be considered to display their individual settings. Each time a device is
selected, its settings will be displayed on the screen.
5. After the settings have been examined for each candidate, the devices determined to be
included in the move may be added to the group in either of the following methods.
• Select the device and click ‘Add’.
• Double click on the device to immediately move it to the ‘Antennas Included In
Move’ box (Figure 7-3).
1. Click on additional models with same Min and Max
tilt to be included in the move.
2. Click ‘<–Add’.
Figure 7-2. Adding Devices to be Included in the Sector Move.