Andrew ATC200-Lite - Manual (Page 46)

Section 7–Changing the Electrical Downtilt-Group ATC200-Lite Teletilt ® Remote Control Downtilt System
7-4 May 2005 Bulletin 639510
9. You will be notified when all antennas
have successfully reached the new tilt
angle. Click ‘OK’ (Figure 7-4).
10. The ‘Set Electrical Tilt for Sector’
screen will display the new electrical
tilt setting in the ‘Current Tilt’ field. At
this point, either additional tilt angles
may be applied or you may return
to the main screen. To return to the
main screen, click ‘Close’ (Figure
7-5).
Figure 7-4. Movement Complete.
Click ‘OK’.
Click ‘Close’.
Figure 7-5. Closing Sector Move Screen.
11. After all electrical tilt adjustments are made, a report can be saved to a file for future refer-
ence (see Section 8).