Andrew ATC200-Lite - Manual (Page 59)

Bulletin 639510 May 2005 10-1
Section 10
Part Numbering Scheme and Ordering Guide
PART NUMBER DESCRIPTION
ATC200-Lite-00xx Local controller system. The system includes:
• local controller, model ATC200-Lite
• Ethernet crossover cable
• power cord*
• Phoenix 48 Volt power connector
• this installation and operation manual, part number 639510
In the future, the system will also include a CD for the ATC200-Lite software.
*The “xx” denotes power cord options as follows:
01 = Australasia (Australia and Asia) 03 = United Kingdom
02 = Europe 04 = North America
ATM200-001 Actuator
ATJB200-A01-00x Junction Box (Each junction box has 1 input, and the “x” denotes the number
of outputs as shown below.)
4 = 4-Way 7 = 7-Way
ATS-A01-002 Two-way splitter enables daisy-chaining actuators on single band antennas.
ATS-B01-003 Three-way splitter enables daisy-chaining actuators on quad port antennas.
ATCB-B01-xxx Control cable linking first to second, or second to third actuators. The “B”
denotes connectors assembled at both ends. The “01” designates cable type.
The “xxx” denotes cable length options as follows:
001 = 1 meter 020 = 20 meters
002 = 2 meters 030 = 30 meters
003 = 3 meters 040 = 40 meters
004 = 4 meters 050 = 50 meters
005 = 5 meters 060 = 60 meters
006 = 6 meters 070 = 70 meters
009 = 9 meters 080 = 80 meters
010 = 10 meters 090 = 90 meters
015 = 15 meters 100 = 100 meters
ATLP-200-001 Lightning Protection Unit (Recommended)
602299 Grounding Kit (Used to ground junction boxes, splitters, and lightning protection
unit.)
40417* Cable Tie Wraps (Used to secure control cable to the tower.)
68MCLICK* Hangers (Used to secure control cable to the tower.)
10.1 Part Numbering Scheme
*Additional cable accessories are available. See ‘Cable Installation Accessories’ link from Andrew’s
Teletilt ® ATC200 web site.