CNB SDN2712CD - Manual (Page 18)

9 / 16 Channel DVR User Guide
18
3-2. LIVE
Set values for live display. Navigate through the menu items by pressing the UP/DOWN buttons..
Menu items in LIVE mode setup
OSD Enable/disable on-screen-display.
SEQUENCE Enable/disable auto sequencing of the screen in full or quad view.
SEQ-DWELL TIME Dwell time for each channel display in sequential display mode.
OSD CONTRAST Set the visibility level of the On Screen Display. (OSD)
CHANNEL Select the channel for applying the following settings by pressing
the LEFT/RIGHT buttons.
DISPLAY Enable/disable display of the video channel in live display mode.
BRIGHTNESS Change the brightness value for the specified channel.
CONTRAST Change the contrast value for the specified channel.
HUE Change the hue value for the specified channel.
SATURATION Change the saturation value for the specified channel.
Figure 3.2.1. LIVE mode setup screen
If the values of BRIGHTNESS, CONTRAST, HUE, & SATURATION is changed, the
video will be recorded as same as changed.
E
N
G
L
I
S
H