CNB SDN2712CD - Manual (Page 30)

9 / 16 Channel DVR User Guide
30
l DHCP
Select DHCP to use the DHCP option when connecting the DVR to a network. An IP address is
automatically assigned by the DHCP server, which assigns IP address and other parameters to
new devices automatically. To see the DVR’s IP address, select DESCRIPTION from the
SYSTEM menu.
If the network connection does not allow additional IP addresses, then an IP sharing device will
be needed. In this case, forwarding may be needed to allow for a network connection. For
more information on port forwarding, see the documentation for your IP sharing device or your
network administrator.
Figure 3.7.3. Network setup screen - DHCP
l ADSL
To use the ADSL option when connecting the DVR to a network, the following information is
required. If you do not have this information, see your network administrator.
ADSL
ID The user ID for ADSL connection
PASSWORD The password for ADSL connection
User’s ADSL connection must have an RJ45 output to connect to the DVR.
When sharing the connection with other devices, an IP sharing device should be used. In this
case, select LAN as the NETWORK type. User will also need to configure the IP sharing device
for port forwarding to allow for a network connection. For more information on port forwarding,
see the documentation for your IP sharing device, or contact your network administrator.
E
N
G
L
I
S
H