CNB SDN2712CD User Manual
Page 22
9 / 16 Channel DVR User Guide
22
3-4. DEVICE
Set the values for recording video. Navigate through menu items by pressing the UP/DOWN
buttons. User can change the value of the menu item by pressing the LEFT/RIGHT buttons.
Menu items in DEVICE mode setup
ALARM-OUT Set the alarm generation for the motion detection, sensor input and video loss.
And set the alarm time duration.
PTZ Set the camera control data speed, number, type and ID.
SPOT-OUT Set the spot type, spot event time, sequence, sequence dwell time and channels.
KEY TONE Enable/Disable button beep sound.
REMOTE CONTROLLER ID Select a ID of remote controller. Please take steps as followings.
STEP 1. Select ID from 1 to 9.
STEP 2. Press the same number as ID set in DVR on a remote controller.
STEP 3. Then
icon will be displayed on Live screen of DVR that respond to
the remote controller.
SENSOR Select the sensor number for applying the following settings.
TYPE Set the type of sensor for the specified channel from none, N/O (normal open),
and N/C (normal closed)
Figure 3.4.1. DEVICE mode setup screen
E
N
G
L
I
S
H