CNB SDN2712CD User Manual
Page 35
9 / 16 Channel DVR User Guide
35
4-1-1. PTZF operation
To operate the PTZF functions, connect the controller to the RS-485/422 port on the rear panel.
In the PTZ control setting in the setup menu, user can select or set the protocol type of the
camera which is the same as the one that is installed on the site. If the camera has a specific
camera ID, select the camera ID using Left or Right button. The PTZ function button is found on
the front panel. Once you press the PTZ button, the screen will appear as in figure 4.4.1.
Highlight the item to select and control the cameras by using the UP and DOWN or LEFT and
RIGHT buttons.
Button functions in PTZF control
PAN / TILT UP or DOWN button for TILT control. LEFT or RIGHT button for PAN control.
ZOOM / FOCUS UP or DOWN button for ZOOM IN/OUT control.
LEFT or RIGHT button for FOCUS NEAR/FAR control.
INITIALIZE Initialize the PTZ settings of the selected camera.
Figure 4.4.1. PTZF control screen
E
N
G
L
I
S
H