CNB SDN2712CD User Manual
Page 24
9 / 16 Channel DVR User Guide
24
Figure 3.4.3. PTZ setup screen
3-4-3. SPOT OUT
By selecting SPOT-OUT in the DEVICE menu, users can set-up the spot-out in the screen
shown in figure 3.4.4.
SPOT OUT mode in device
SPOT TYPE
FULL Set to enlarge a selected channel for spot out display.
QUAD Set quad view for spot out display.
SPOT ON EVENT Enable/disable the spot-out display for occurrence of a event detection.
SPOT EVENT DWELL TIME Dwell time for spot out display on event.(1~10seconds)
SEQUENCE Enable/disable sequential display to spot out of video channels in full screen mode.
SEQ-DWELL TIME Dwell time for each channel display to spot out in sequential display mode.
(1~10seconds)
SPOT CHANNEL Select the video channel numbers for spot out.
Figure 3.4.4. SPOT OUT setup screen
E
N
G
L
I
S
H