CognitiveTPG Advantage DLX - Manual (Page 10)

Copyright © 2009 CognitiveTPG - 1.800.732.8950 10
5. Lower the print head. Do not latch the printhead at this
time.
6. Align the notches on the left side of the ribbon take
up core with the left spindle.
7. Gently pull the right take up spindle and insert the
right side of the ribbon take up core.
REMINDER: THE TEXT ON THE RIBBON LEADER FACES OUT.
8. Latch the printhead and turn the Power ON to take
up the slack in the ribbon leader.
HELPFUL TIP: THE ADVANTAGE DLX WILL TAKE UP ANY EXCESS RIBBON UPON LATCHING
THE PRINTHEAD.