CognitiveTPG Advantage DLX - Manual (Page 22)

Copyright © 2009 CognitiveTPG - 1.800.732.8950 22
Updating Firmware
1. Select the Firmware and CPR
Upgrade tab.
2. Click the Select Firmware File button.
3. Select the appropriate Firmware file and
click Ok.
4. Click the Update Firmware button.
CAUTION! TURNING THE PRINTER OFF DURING
FIRMWARE INSTALLATION COULD DAMAGE THE
PRINTER.
CPL Editor
Use the CPL (Cognitive Printer Language) Editor in
CognitiveTPG Administrator to send CPL to the
printer. For more information on programming CPL
please refer to the CPL Programmers guide located on
the website at
http://www.cognitivetpg.com/Downloads_18.aspx.