CognitiveTPG Advantage DLX User Manual
Page 19
Copyright © 2009 CognitiveTPG - 1.800.732.8950
19
Primary Language
Selects the primary command language the printer uses. The Advantage DLX
uses Cognitive Printer Language (CPL) as the default command language.
Select between CPL, EcPL, and ZcPL command languages.
NOTE: THE ADVANTAGE DLX CURRENTLY DOES NOT SUPPORT TPCL COMMAND
LANGUAGE.
Thermal Mode
Select Direct Thermal or Thermal Transfer based on the model of Advantage
DLX printer and the type of media being used.
IMPORTANT!
THERMAL TRANSFER MODE REQUIRES THE USE OF A THERMAL
TRANSFER PRINTER AND A PRINT RIBBON. DIRECT THERMAL MODE REQUIRES THE
USE OF DIRECT THERMAL MEDIA.
Label Positioning
Print Width
The
Print Width value adjusts the maximum
printing width of the printer.
Range:
• 0.15 to 2.4 inches for 2 inch model
printers
• 0.15 to 4.2 inches for 4 inch model
printers
Auto Recalibration
Check and Apply
Enable Auto Recalibration and the printer will
automatically attempt to recalibrate in the event an index mark is not detected.
Auto Top Of Form
Check and Apply
Enable Automatic TOF and the printer will feed a label
when the printer is turned ON or the printhead is latched.
Indexing
Indexing indicates to the printer the index type of the media being used. The
Indexing On check box must be checked when using Bar, Gap, or Notch style
indexing. Uncheck the
Indexing On box when using continuous media.