CognitiveTPG Advantage DLX User Manual
Page 18
Copyright © 2009 CognitiveTPG - 1.800.732.8950
18
Debug Report Level
Specifies the method by which the printer reports error.
Values:
• None = Turns error reporting Off.
• Serial = Printer sends error report to host device via serial port.
• Serial & Label = Printer sends error report via serial port and prints an
error label.
Auxiliary Power ON
Check Auxiliary Power ON to enable the 5V serial port output.
Enable Automatic Reprint
Checking the Enable Automatic Reprint box prompts the printer to reprint a
label in the event the printer detects an index mark prior to completing the
requested label.
Media Adjust
Adjust the sharpness of the leading edge of printed text or rotated barcodes.
Media Adjust range = 0 to 3.
Pitch
The pitch represents the dots per inch (dpi) setting for the printer.
Values:
• 100 or 200 for 200 dpi printers
• 150 or 300 for 300 dpi printers
Darkness
The
Darkness value adjusts the print darkness.
Darkness ran ge: -200 to 800
NOTE: THE FACTORY DEFAULT FOR DARKNESS IS 0.