Chapter, Chapter 4: cognitivetpg administrator – CognitiveTPG Advantage DLX User Manual
Page 16
Copyright © 2009 CognitiveTPG - 1.800.732.8950
16
Chapter 4: CognitiveTPG Administrator
CognitiveTPG Administrator is a Java based utility designed for installation on
various operating system platforms. Administrator allows complete control over
the profiles and settings of the Advantage DLX printer.
Connection Settings
Connecting Via USB
1. Select the System Printer
Connection radio dial.
2. Select the appropriate printer from
the
Printer Name drop down
menu.
3. Click Connect.
NOTE: WHEN THE PRINTER IS PROPERLY
CONNECTED COGNITIVE ADMINISTRATOR WILL
DISPLAY CONNECTED IN A GREEN BOX IN THE
UPPER RIGHT HAND CORNER.
Connecting Via Serial
1. Select the Use Serial Connection radio dial.
2. Select the Com port to which the printer is connected.
3. Select the printer’s baud rate setting.
Note:
THE ADVANTAGE DLX DEFAULT BAUD RATE IS 9600.
Connecting Via Ethernet
1. Select the Use Network Connection radio dial.
2. Input the printer’s IP Address.
3. Input the printer’s RTEL port number.
HELPFUL TIP:
PRINT A SELF TEST TO DETERMINE THE PRINTER’S CURRENT SETTINGS.
A SELF TEST CAN BE PERFORMED BY HOLDING THE FEED BUTTON WHILE TURNING
THE PRINTER POWER ON. CONTINUE TO HOLD THE FEED BUTTON UNTIL THE SELF
TEST PRINTS.
Chapter
4