CognitiveTPG Advantage DLX User Manual
Page 11
Copyright © 2009 CognitiveTPG - 1.800.732.8950
11
Loading Media
NOTE: USE ONLY COGNITIVETPG APPROVED MEDIA. FOR MORE INFORMATION ON
COGNITIVETPG APPROVED SUPPLIES CONTACT US AT 800-732-8950 EXT. 2.
1. Raise the dust cover.
2. Place the media roll in the media tray keeping the media guide
to the right hand side.
3. Slide the media guide to the left until it is holding the roll
firmly against the left wall of the media tray.
4. Unlatch and raise the printhead mechanism.
5. Guide the media through the opening under the printhead
mechanism remembering to keep the media face up.
6. Securely latch the printhead.
7. Print a Self Test. Press and hold the feed button while turning
the print ON to print a Self Test.
NOTE: AFTER PRINTING A SELF TEST THE PRINTER IS IN HEXIDECIMAL DUMP MODE.
CYCLE THE PRINTER’S POWER TO RETURN TO NORMAL OPERATION.
HELPFUL TIP:
ENABLE AUTOMATIC TOP OF FORM AND THE ADVANTAGE DLX WILL
ADVANCE TO THE NEXT INDEX MARK WHEN THE PRINTHEAD LATCHES OR THE
PRINTER IS TURNED ON (CHAPTER 4).