CONTREX CX-1010 - Manual (Page 37)

Page 35
WIRING
This section contains the input and output wiring information for the CX–1010 Analog I/O Card. Please read
this section prior to wiring the Analog I/O Card to ensure that you make the appropriate wiring decisions.
The CX-1010 will support one Analog I/O Card in either of the two available slots. The factory calibrated
Analog I/O Card has two inputs and one output available. Both the inputs and output are calibrated for + 12V
or 0 to 20 mA signals. The Analog I/O Card is fully isolated from the CPU core. For the specifications for
the Analog I/O Card, refer to CX-1010 Technical Reference Manual, Appendices Appendix A.
Warning
The Analog I/O Card should only be
installed by a qualified technician.
Take the proper antistatic precautions.