Configuration – CONTREX CX-1010 User Manual
Page 5
Advertising
Page 3
CONFIGURATION
This section will show you how to re-configure the CX-1010 for electrical compatibility. Complete this
procedure prior to installation. This procedure does not require power to complete.
The area that is involved in re-configuring the CX-1010 is the AC Power Input Voltage switch. This switch
is located in an external location on the CX-1010. You will not be required to access the interior of the
CX-1010.
Figure 1 (page 5) illustrates the location of this switch.
Advertising