CONTREX ML-TRIM - Manual (Page 151)

D - 1
APPENDIX D: CONTROL PARAMETER
REFERENCE
USER
CODE DESCRIPTION MIN MAX DEFAULT RECORD UNITS
CP-01 Master Setpoint 1 0000 9999 0000 ENG
CP-02 Master Setpoint 2 0000 9999 0000 ENG
CP-03 Follower Setpoint 1 0000 9999 0000 ENG
CP-04 Follower Setpoint 2 0000 9999 0000 ENG
CP-05 Jog Setpoint 0000 9999 50 RPM
CP-06 Direct Setpoint 0 +100 0 %
CP-10 Alarm Format 0 15 15 CODED
CP-12 Low Alarm 0000 9999 0000 RPM
CP-13 High Alarm 0000 9999 2000 RPM
CP-14 Ramped Error Alarm 0000 9999 2000 RPM
CP-15 Scaled Error Alarm 0000 9999 2000 RPM
CP-16 Acceleration Time 000.0 600.0 5.0 SEC
CP-17 Deceleration Time 000.0 600.0 5.0 SEC
CP-20 Master Eng. Units 0.000 9999 2000 ENG
CP-21 Follower Eng. Units 0.000 9999 1.000 ENG
CP-30 PPR Lead 1 9999 60 PPR
CP-31 PPR Feedback 1 9999 60 PPR
CP-33 Max RPM Lead 1 9999 2000 RPM
CP-34 Max RPM Feedback 1 9999 2000 RPM
CP-61 Direct Enable 0 1 0 CODED
CP-62 Inverse Scaling 1 2 1 CODED
CP-64 Display Mode Follower 1 2 2 CODED
CP-65 Gain 0 9999 9000 —
CP-66 Integral 0 9999 2000 —
CP-67 Derivative 0 9999 9000 —
CP-70 Device Address 1 32 1 —
CP-71 Baud Rate 1 6 6 CODED
CP-72 Character Format 1 3 2 CODED
CP-73 Control Mask 0 3 0 CODED
CP-74 Drive Enable Logic 0 1 0 CODED
CP-98 Keypad Lockout 1 9999 0 CODED