CONTREX ML-TRIM - Manual (Page 26)

2 - 12
Figure 2-13 Setpoint Select
Setpoint Select (J5 pins 13, 14)
The Master and Follower setpoints
are determined by the Setpoint Select
input combined with the Master/
Follower Input. For access to Master
Control Parameters 1 and 2 and
Follower Control Parameters 3 and 4,
refer to the chart below.
CONTROL
PARAMETER 1 OR 3
CONTROL
PARAMETER 2 OR 4
13
14
J5
Master/Follower
Input Open
Master/Follower
Input Closed
Setpoint Select / Closed Setpoint Select / Open
Master Control Parameter 1 Master Control Parameter 2
Follower Control Parameter 3 Follower Control Parameter 4