Aastra ip phone ui – Aastra Telecom Pro 160 User Manual
Page 71
Managing Calls
41-001134-05, Rev 00, Rel. 1.1
2-51
Operating Your Aastra IP Phone Using the Phone UI
Use the following procedure to enable/disable Find-Me Follow-Me on your
phone.
Aastra IP Phone UI
Step
Action
1
Press the Services softkey, then select Call Settings->FindMe FollowMe.
or
Press the Options key, then select Services->Call Settings->FindMe FollowMe.
2
Select Mode, then press Select.
3
Set the Mode field to one of the following options, then press Select:
•
Parallel - The Primary and Secondary phones ring simultaneously.
•
Sequential - The Primary phone rings first. If you do not answer the call, then the Secondary
phone rings.
•
Disable - Disables Find-Me Follow-Me.
Note: You have 30 seconds to answer a call on your primary phone. If you do not answer the call
within this time, Find-Me Follow-Me progresses to the next stage (i.e., your secondary phone rings).
4
Press Continue to return to the Find-Me Follow-Me screen.
5
To specify your primary phone number, select Primary, then press Select. (If you set the Mode
parameter to sequential, the Primary number you specify here rings first.)
6
Do one of the following actions:
•
To use your current phone number (listed in the corporate directory) select Use My Info and
press Select. Press Select again to confirm your choice.
•
To specify a different number, select Enter Number, then use the Backspace key to erase the
current number. Enter a new number and press Enter.
7
To specify your secondary phone number, select Secondary, then press Select.