CTI Products HIB-IP IP Interface - Manual (Page 17)

CTI Products, Inc. HIB-IP & HIB-IP 8000 Hardware Reference Manual
Appendix A. Factory Default Settings 17
4. T
ESTING
HTTP S TATUS P AGE
The HIB-IP and HIB-IP 8000 units have an HTTP page that shows the status of the unit, including the IP
parameters programmed into it and its On-Line / Off-Line status. This is useful for system troubleshooting. .
On the HIB-IP 8000 units, this feature is turned off at the factory by default.
Connect your PC to the HIB-IP via a LAN and enter the IP address of the HIB-IP in the address window:
Option Switch 2 must be Up for this page to be active.
The HTTP Status Page lists the current configuration for the HIB-IP unit.
Obviously, if the HIB-IP unit's own IP parameters are set wrong, you won't be able to see the Status Page.
Note: Some networks (including Motorola Solutions, Inc. Radio Network Infrastructure - RNI) have routers
and/or firewalls that restrict HTTP traffic between certain network segments or subnets. If you have such a
system, you may not be able to open the HTTP page from a different IP segment or subnet, even if you have
the HTTP page enabled on the HIB-IP unit.
Data entered from MCN Config program
(except for MAC Address)
On-Line Status indicator:
False: No PC Connected
True PC running MCN Software is connected
to HIB-IP unit.