Rear panel, 10base-t warning, Option switch settings – CTI Products HIB-IP IP Interface User Manual
Page 8: Ethernet connector, Option switches, Anel, Figure 3 hib-ip rear panel, Figure 4 option switch settings
CTI Products, Inc.
HIB-IP & HIB-IP 8000 Hardware Reference Manual
1. Introduction
8
R
EAR
P
ANEL
DC IN
OPTION
10BASE-T
1 2 3 4 5 6 7 8
ON
Figure 3 HIB-IP Rear Panel
10Base-T Warning
Do not connect the 10Base-T connector to an MCN Network connector.
Damage could result.
Option Switch Settings
1
2
3
4
5
6
7
8
ON
Function
Up
Down
Default
1. Must be Up
Up
2. HTTP Enable
HTTP On
HTTP Page Off
Down
3. Must be Down
Down
4. Must be Up
Up
5. Must be Up
Up
6. Must be Up
Up
7. Must be Up.............................................
Up
8. Must be Up
........................................
Up
Figure 4 Option Switch Settings
DC IN
Input Power
This powers only this unit.
Power is not passed to the
Network Out connector.
OPTION Switches
See table below for options.
Ethernet Connector
10Base-T)
*** See 10Base-T Warning ***