Assembly gun block and gun handle – Magnum Venus Plastech Gel Coat Gun EMG-1500 User Manual
Page 20
Advertising
EMG-1000 & EMG-1500 Gel Coat Gun
WARNING: Be careful not to bend the catalyst and resin needles.
Assembly Gun Block and Gun Handle
1.
Attach the Gun Head Assembly (EMG-1001-01) to the Gun Handle (54350-3)
using Cap Screw (F-CS-04C-12).
2.
Slide Trigger (MAX-2040) into place against the needles and line up the holes
with the handle.
3.
Push Trigger Stud (54630-1) thru both the Trigger (MAX-2040) and the Gun
Handle (54350-3) and retain with Screw (00145).
CHAPTER
2
Advertising
This manual is related to the following products: