Magnum Venus Plastech Gel Coat Gun EMG-1500 - Manual (Page 5)

Be sure that the power to the pump is OFF before undertaking ANY repair, maintenance
or adjustment.
If it is necessary to adjust or clean the nozzle on site, be sure that it is aimed away from
all personnel so that it may discharge safely if there is residual pressure in the system.
Do NOT
use any replacement part that does not meet the manufacturer’s specifications.
Correct packing or valve seal leaks IMMEDIATELY.
Frequently check the condition of all pressurized components, especially fluid lines.
Replace worn lines and parts before they fail.
If nozzle clogging occurs frequently, use a fluid filter with proper mesh size.