Micromod Micro-DCI: 53HC2600 LoopMaster SL6000 CONFIGURATION TOOLKIT - Manual (Page 17)

53HC2600 INSTRUCTION MANUAL
Installation 9
2.1.5 LoopMaster Software Installation
Now the process of installing the LoopMaster software can begin.
1. Pre-Setup Procedure
• Check that the LoopMaster hardware key is connected to the parallel port of the com-
puter.
• Have the LoopMaster license key ready.
• Turn on power to the base PC and boot the Windows operating system software.
• Log on to the Windows operating system software with administrative privileges. You must
have administrative privileges or the installation process will not complete successfully.
• Close any open Windows applications (for example, Microsoft Word, Excel, Mail, Sched-
uler, etc.).
2. Beginning Micro-DCI Master Setup
• Insert the Micro-DCI CD into the CD-ROM drive.
• Open Explorer and select the drive letter of the CD-ROM drive.
• In the root directory of the CD-ROM, double click on the setup.exe file.
• In the Micro-DCI Master Setup, click on the LoopMaster Setup button.
3. Beginning LoopMaster Installation
• The InstallShield Wizard is loaded and then the LoopMaster System Setup window
appears.
• Click Next to begin installing the LoopMaster.
• Click the OK button if a font-size information window opens.
4. The Micro-DCI Communication Services
• The Micro-DCI Communication Services Setup window appears. Click on the Next button
to proceed.
5. Micro-DCI Communication Services Location
• The Choose Destination Location window appears, which enables you to specify the drive
and directory where you want the Micro-DCI Communication Services installed. You can
accept the default path of C:\udci by clicking the Next button, or you can change the
destination directory by clicking the Browse button.
• If you clicked the Browse button, enter both the drive and directory you want to use as the
destination directory in the Choose Directory field.
• Click the Next button.
• If the directory does not exist, Setup will ask you if it should be created. If this window
appears, click the Yes button.
✎ NOTE If the Micro-DCI Communications Services are being installed for
the first time, the setup routine will prompt for them to be installed.
Click on the OK button and prompts will appear for Items 4 through
9. Otherwise these items will be skipped and the installation
process will proceed to item 10.