Micromod Micro-DCI: 53HC2600 LoopMaster SL6000 CONFIGURATION TOOLKIT - Manual (Page 86)

53HC2600 INSTRUCTION MANUAL
78 Menus and Toolbar Buttons
Data Transfer
The Data Transfer menu provides four dynamic commands to move a specified configuration file from the
personal computer to an addressed controller; to copy the configuration from an addressed controller as a
.S6D file in the personal computer; to change the controller function index to a one for dynamic operation;
and to change the function index in the controller to a zero, whereby control action stops and the last out-
put value is continuously transmitted.
DOWNLOAD TO Micro-Mite...
It immediately invokes the Download To Controller dialog to select an offline .S6D file to
be downloaded to a specified controller, whereby the source file (name, drive, path, etc.)
and destination controller address must be specified.
UPLOAD FROM MICRO-MITE...
It immediately invokes the Upload From Controller dialog to select an online configuration
from a controller to be uploaded to the personal computer as a .S6D file, whereby the
source controller address and destination file (name, drive, path, etc.) must be specified.
RUN CONTROLLER
It sets the function index of the connected controller to one, which causes it to resume
dynamic operation.
STOP CONTROLLER
It sets the function index of the connected controller to zero, which causes it to stop
dynamic operation.
*Download to Micro-Mite...
*Upload from Micro-Mite...
*Run Controller
*Stop Controller