Micromod Micro-DCI: 53HC2600 LoopMaster SL6000 CONFIGURATION TOOLKIT - Manual (Page 84)

53HC2600 INSTRUCTION MANUAL
76 Menus and Toolbar Buttons
File Menu
The File menu provides a command suite to open, close, save, and print files. The LoopMaster program
can also be exited from this menu.
START ONLINE SESSION...
Used to initiate an online session. Selecting this command immediately invokes the
Select A Controller dialog, which solicits inputs for the personal computer COM port and
instrument address.
NEW OFFLINE FILE
Used to initiate an offline configuration session. Selecting this command immediately
invokes the Tagname dialog, which solicits a name to be assigned to the new offline file.
OPEN OFFLINE FILE...
It is used to select an existing offline .S6D file for modification. Selecting this command
immediately invokes the Open dialog, which solicits file name and path inputs.
CLOSE
Causes the active online or offline configuration session to close, but the LoopMaster
configuration toolkit main menu remains.
SAVE
Causes the currently active offline configuration file to be saved. If an online
configuration session is active, it immediately invokes the Upload From Controller dialog,
whereby the source controller and destination file (name, drive, path, etc.) must be
specified.
SAVE AS
If an offline configuration session is active, it immediately invokes the File Save As dialog,
whereby the destination file (name, drive, path, etc.) must be specified. If an online
configuration session is active, it immediately invokes the Upload From Controller dialog,
whereby the source controller and destination file (name, drive, path, etc.) must be
specified.
*Start online session...
*New offline file
*Open offline file...
Close
*Save
Save As
*Print...
*Print Preview
Print Setup...
filename.S6D
Exit