Micromod Micro-DCI: 53HC2600 LoopMaster SL6000 CONFIGURATION TOOLKIT - Manual (Page 29)

53HC2600 INSTRUCTION MANUAL
Guided Tour 21
When you click OK, LoopMaster writes all the parameters in the dialog to the configuration database.
You’ll see your change in the Standard AI dialog because the text below the Digital Filter button now
reads 1.5 s. Leave the Standard AI dialog open for one more step.
3.8.3 Adding DOCUMENTER Information
Since this is an offline configuration, we can take advantage of storing additional information for the
Documenter Report.
1. Click on the Doc Info... button to enter information for the Documenter Report.
You can select the type of transmitter connected to this AI. The wiring changes, depending upon the trans-
mitter type. (Leave the Generic radio button on.)
The Documenter Report has a Rear Connections Diagram showing how the I/O connectors are wired. The
First line and Second line of text will be used to label this input connection. Type in the text as shown and
click OK. This information is used by the LoopMaster Documenter to enhance the rear connections dia-
grams.
In the Standard AI dialog, click Close to close this dialog.
This completes the configuration of the first analog input. In the next section, we’ll view the Documenter
Report and see where the Doc Info text appears.
Figure 3-5. Adding Information for the Documenter Report