Micromod MOD: Modcell 2050R Users Guide - Manual (Page 2)

MicroMod Automation, Inc.
The Company
MicroMod Automation is dedicated to improving customer efficiency by providing the most cost-effective, application-
specific process solutions available. We are a highly responsive, application-focused company with years of expertise in
control systems design and implementation.
We are committed to teamwork, high quality manufacturing, advanced technology and unrivaled service and support.
The quality, accuracy and performance of the Company's products result from over 100 years experience, combined with
a continuous program of innovative design and development to incorporate the latest technology.
Use of Instructions
Although Warning hazards are related to personal injury, and Caution hazards are associated with equipment or
property damage, it
must be understood that operation of damaged equipment could, under certain operational conditions, result in degraded
process
system performance leading to personal injury or death. Therefore, comply fully with all Warning and Caution notices.
Information in this manual is intended only to assist our customers in the efficient operation of our equipment. Use of this
manual for
any other purpose is specifically prohibited and its contents are not to be reproduced in full or part without prior approval
of MicroMod Automation, Inc.
Licensing, Trademarks and Copyrights
MOD 30 and MOD 30ML are trademarks of MicroMod Automation, Inc.
MODBUS is a trademark of Modicon Inc.
Health and Safety
To ensure that our products are safe and without risk to health, the following points must be noted:
The relevant sections of these instructions must be read carefully before proceeding.
1. Warning Labels on containers and packages must be observed.
2. Installation, operation, maintenance and servicing must only be carried out by suitably trained personnel and in
accordance with the information given or injury or death could result.
3. Normal safety procedures must be taken to avoid the possibility of an accident occurring when operating in
conditions of high
4. pressure and/or temperature.
5. Chemicals must be stored away from heat, protected from temperature extremes and powders kept dry. Normal
safe handling procedures must be used.
6. When disposing of chemicals, ensure that no two chemicals are mixed.
Safety advice concerning the use of the equipment described in this manual may be obtained from the Company address
on the back
cover, together with servicing and spares information.
Ì Warning. An instruction that draws attention to the
risk of injury or death.
 Note. Clarification of an instruction or additional
information.
q Caution. An instruction that draws attention to the risk
of the product, process or surroundings.
i Information. Further reference for more detailed
information or technical details.
All software, including design, appearance, algorithms and source codes, is copyrighted by
MicroMod Automation, inc. and is owned by MicroMod Automation or its suppliers.