Micromod MOD: Modcell 2050R Users Guide - Manual (Page 40)

IB-23C650
SETUP
Table 1. Base Configuration
Step Step Description
Top
Display
4.1.2.1 Input 2 Calibration Correction.
UP or DN sets correction temperature.
SCRL advances to Step 5.
I2 TEMP=
5 Output Type.
UP or DN selects output type.
SCRL advances to Step 5.1.
OUTPUT
5.1 Control Action.
UP or DN selects control action.
SCRL advances to:
Step 5.2 if output type is CUR PROP,
Step 5.3 if output type is HC/CR or HC/CC,
Step 5.4 if output type is HC/RR,
Step 5.5 if output type is POS PROP, or
Step 6 (Hold Pwr Up Msg) otherwise.
CONTROL
5.2 Milliamp Output Action.
UP or DN selects mA output action.
SCRL advances to Step 6 (Hold Pwr Up Msg).
MA. OUTP
5.3 Heat Band Output Action.
UP or DN selects heat band output action.
SCRL advances to Step 5.4.
HEAT OUT
34