Micromod MOD: Modcell 2050R Users Guide - Manual (Page 65)

IB-23C650
SETUP
Table 2. Input Setup Menu
Middle
Display
Bottom
Display
Entry Description
LABEL xxx Where x = any of the characters listed under
Tag Name in the Tune Menu (Table 11).
This is the label appended to the numeric
process and set-point displays.
When possible, a space will appear between
the numeric value and the label. However, if 5
characters are required for the value, the space
will be lost. If 6 are required, the third label
character will be lost. For this reason, a 1 or 2
character label would be preferable.
e.g.
23.2 GPM
37.58GPM
103.47GP
BAR OUTPUT
DEVIATN
= Display the control output in the right bar
display.
= Display deviation (process - setpoint) in the
right bar display. Allows deviation to be
viewed in the Displays menu.
FULL SCL xx 1 to 100% of span
This is the positive or negative deviation that
will give a full scale indication on the deviation
bar. For example, if span is 200 and Full Scale
is set to 25%, then a deviation of ±50 would
give a full scale indication on the deviation bar.
If span is 50 and Full Scale is set to 50%, then
a deviation of ±25 would give a full scale
indication on the deviation bar.
59