MotorVac CarbonClean System MCS 245 User Manual
Page 19
Advertising
17.
As shown in the next figure, disconnect the female end of the T-adaptor (#060-4500)
from the carburetor and connect it to itself at the male fitting. This stops the flow of
fuel from the vehicle to the carburetor during the cleaning process.
18.
As shown in the previous figure, connect the output (
red
) hose from the unit to the
adaptor going into the carburetor.
You are now ready to perform the carburetor cleaning procedure.
CARBURETOR
FUEL TANK
ADAPTOR
ADAPTOR
RED HOSE
BLACK HOSE
060-4500 " T "
PRESSURE LINE
➩ ➩ ➩
Advertising