MotorVac CarbonClean System MCS 245 - Manual (Page 25)

16.
As shown in the next figure, connect one end of the loop adaptor (#060-2501) to the
pressure line coming from the vehicle's fuel tank. Connect the other end of the loop
adaptor (#060-2501) to the return line going back to the fuel tank. This forms a tank-
to-tank loop, making it unnecessary to disconnect the fuel pump.
17.
As shown in the previous figure, connect the output ( red ) hose from the unit to the
adaptor on the pressure line going into the TBI unit.
18. As shown in the previous figure, connect the return ( black ) hose from the unit to the
adaptor on the return line coming from the TBI unit.
You are now ready to perform the TBI cleaning procedure.
FILTER
RED HOSE
BLACK HOSE
THROTTLE BODY UNIT
ADAPTOR
ADAPTOR
ADAPTOR
ADAPTOR
060-2501
"LOOP"
PRESSURE LINE ➩ ➩ ➩
RETURN LINE ➩➩ ➩
FUEL TANK