MotorVac CarbonClean System MCS 245 - Manual (Page 57)

Replace the Fuel Filter
1.
Unscrew the old fuel filter from the mounting station on the back of the unit’s cabinet.
2. Lightly grease the seal of the new filter and hand-tighten it onto the mounting head.
3. Add 16 ozs. of MotorVac CarbonClean Detergent and Top Engine Cleaner to the fuel reservoir and
then fill the unit’s fuel reservoir with clean gasoline until the Fuel Level Window indicates 1/4 tank.
4. Check the filter for leaks.
5. Enter your initials, the date, and a check mark in the appropriate boxes of the Maintenance Record at the
end of this chapter.
The unit is now ready for the next cleaning service.
Maintenance Record
Use the following table to keep a record of maintenance performed on the unit.
Initial/Date
DRAIN FUEL
RESERVOIR
9
REPLACE FUEL
FILTER
9
CLEAN EXT.
CABINET
9
CHECK HOSES
AND WIRES
9
OTHER
9
/
/
/
/
/
/
/
/
/
/
/
/