Setting the sleep timer – Aiwa CSD-NS1 User Manual

Page 13

Advertising
background image

En

ENGLISH

13

Maintenance

To clean the cabinet

Use a soft cloth lightly moistened with mild
detergent solution. Do not use strong solvents
such as alcohol, benzine or thinner.

To clean the heads

When the tape heads are dirty;

- high frequency sound is not emitted
- the sound is not adequately high
- the sound is off-balance
- the tape cannot be erased
- the tape cannot be recorded on

After every 10 hours of use, clean the tape heads
with a head cleaning cassette.
Use separately sold dry-type or wet-type cleaning
cassette.
Refer to the instructions of the cleaning cassette
for details.

To clean the lens

Use a cotton swab
slightly moistened with
cleaning fluid. Wipe
gently from the center
to the edge.

Lens

SETTING THE SLEEP TIMER

The unit can be turned off automatically at a specified
time.

1

Press SLEEP.

2

Within 4 seconds, turn VOLUME/TIMER to
specify the timer-activated period.

The time changes between 5 and 180 minutes in
5-minute units.

r

or

t

is also available.

To check the remaining timer-activated period

Press SLEEP once. The remaining time until the power
is turned off is displayed for 4 seconds.

To cancel the sleep timer

Press SLEEP twice so that “OFF” is displayed.

Simple sleep timer setting

Press SLEEP while the power is off. The unit is turned
on with the last function, and the sleep timer is
automatically turned on with the 30-minute setting.
Select the function, if needed, and start playback.

a

r

,

t

Advertising