Aiwa CSD-NS1 - Manual (Page 9)

ENGLISH
9
0-9, +10
REPEAT
a PAUSE
MODE
s STOP
r , t
c PLAY
PROGRAMMED PLAY
Up to 30 tracks can be programmed from the disc.
Operate with the remote control.
1
In stop mode, press MODE repeatedly
until “MEMO” flashes in the display.
2
Press the numbered buttons 0-9 and +10
to program a track.
Example:
To select the 12th track, press +10 and 2.
To select the 20th track, press +10, +10 and 0.
3
Repeat step 2 to program other tracks.
4
Press c PLAY to start play.
To check the program, press r or t in stop
mode.
To clear the program, press s or MODE once in stop
mode so that “MEMO” disappears in the display.
To add tracks to the program, repeat step 2 in stop
mode. The track will be programmed after the last track.
To change the programmed tracks, clear the
program and repeat all the steps again.
NOTE
The total playing time of the selected tracks will be
displayed as “--:--” .
- When it exceeds “99:59”.
- When a track number 31 or higher is selected.
En
REPEAT, RANDOM PLAY
A single track or all tracks can be played repeatedly,
and all the tracks randomly. Random play can be
repeated as well.
Operate with the remote control.
Repeat play
Press REPEAT repeatedly to select or .
: Repeats all the tracks.
: Repeats a single track. Select a track with r or
t .
To cancel, press the button repeatedly so that
disappears.
Random play
In stop mode, press MODE once so that “RANDOM” is
displayed.
To cancel, press MODE twice in stop mode.
NOTE
• During random play, you cannot skip back to the
previous track with r .
• When selecting a track with the numbered buttons,
random play is canceled.
Program number
Selected track number
Total playing time of
the selected tracks
Total number of the
selected tracks