Aiwa CSD-NS1 - Manual (Page 4)

4
ENGLISH
Power supply
Connecting antennas
Connect the AM loop antenna to the AM LOOP
terminals on the rear of the unit. Keep the antenna
away from metallic objects, electrical equipment and
cords.
For better FM reception, connect an outdoor antenna to
the FM 75
Ω
terminals.
Using on AC house current
Connect the AC cord as illustrated below.
The rated voltage of the unit is 120 V AC.
CAUTION
Use only the supplied AC cord. Use with other cords
may result in the risk of fire.
Power economizing (ECO) mode
Setting the unit to the ECO mode reduces the power
consumption while the unit is turned off (standby).
• When the clock is set for the first time, the ECO mode
is automatically activated.
• In the ECO mode, everything on the display goes out
and only the POWER 6 STANDBY indicator lights up.
To cancel the ECO mode
Press ECO while the power is off.
The clock is always displayed while the power is off.
To restore the ECO mode, repeat the above.
Power consumption in standby mode
with ECO mode on: 1.2 W
with ECO mode off: 9.4 W
ECO
supplied AC cord
1 to the AC inlet of
the unit
2 to an AC outlet
(AC 120 V, 60 Hz)