Aiwa CSD-NS1 - Manual (Page 8)

8
ENGLISH
1
Press CD.
The power is turned on.
2
Press CD OPEN/CLOSE to open the disc
compartment. Set a disc with the printed
side up, then press CD OPEN/CLOSE to
close the disc compartment.
Total number of tracks and total playing time are
displayed. It will take about 15 seconds when
loading a CD-RW disc.
3
Press d PLAY/DIR/PRESET to start
play.
The number of the track being played and elapsed
playing time are displayed.
To remove the disc
Open the disc compartment. Pick up the disc, holding
its edge, while pressing the center pivot gently.
s STOP/CLEAR – Stops play.
a PAUSE/SET – Pauses play. To resume play, press
again.
r,t – Searches for a particular point during
playback. Hold down r or t and then release
it.
– Skips to the beginning of a track. Press
r or
t repeatedly.
CD OPERATION
B
To start play when the power is off, press CD. The
power is turned on and play of the loaded disc begins
(Direct Play Function).
To select a track directly with the remote control,
press the numbered buttons 0-9 and +10. CD play
starts from the selected track and continues to the last
track.
Example:
To select number 25, press +10, +10 and 5.
To select number 10, press +10 and 0.
After listening, press POWER 6 STANDBY/ON to turn
the power off.
NOTE
• Do not use irregular shape CDs (example: heart-
shaped, octagonal ones).
It may result in malfunctions.
• Do not place more than one disc in the disc
compartment.
• Do not touch the lens. Doing so may cause
malfunctions.
• The unit may not play a CD-R/RW disc that is
recorded on personal computers or some kinds of
CD-R/RW recorders because of differences in
recording platforms.
• Do not attach any seal or label to either side (the
recordable side or the labeled side) of a CD-R/RW
disc. It may cause malfunction.
• When loading an unrecorded CD-R/RW disc, you
may not open the disc compartment immediately after
pressing CD OPEN/CLOSE. Wait for a while.
POWER
6 STANDBY/ ON
a PAUSE / SET
s STOP/ CLEAR
r , t
d PLAY / DIR / PRESET
CD
CD OPEN /
CLOSE