Aiwa CSD-NS1 - Manual (Page 3)

ENGLISH
3
4 Extension cord - To help prevent electric shock, do
not use a polarized AC power plug with an extension
cord, receptacle, or other outlet unless the polarized
plug can be completely inserted to prevent exposure
of the blades of the plug.
5 When not in use - Unplug the AC power cord from
the AC outlet or remove all the batteries if the unit
will not be used for several months or more. When
the cord is plugged in, a small amount of current
continues to flow to the unit, even when the power is
turned off.
Outdoor Antenna
1 Power lines - When connecting an outdoor antenna,
make sure it is located away from power lines.
2 Outdoor antenna grounding - Be sure the antenna
system is properly grounded to provide protection
against unexpected voltage surges or static
electricity build-up. Article 810 of the National
Electrical Code, ANSI/NFPA 70, provides
information on proper grounding of the mast,
supporting structure, and the lead-in wire to the
antenna discharge unit, as well as the size of the
grounding unit, connection to grounding terminals,
and requirements for grounding terminals
themselves.
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE
UNIT
(NEC SECTION 810-20)
GROUNDING
CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250 PART H)
NEC-NATIONAL ELECTRICAL CODE
ELECTRIC
SERVICE
EQUIPMENT
GROUND CLAMP
Antenna Grounding According to the National Electrical Code
Maintenance
Clean the unit only as recommended in the Operating
Instructions.
Damage Requiring Service
Have the units serviced by a qualified service
technician if:
- The AC power cord or plug has been damaged
- Foreign objects or liquid have got inside the unit
- The unit has been exposed to rain or water
- The unit does not seem to operate normally
- The unit exhibits a marked change in performance
- The unit has been dropped, or the cabinet has been
damaged
DO NOT ATTEMPT TO SERVICE THE UNIT
YOURSELF.
En
Specifications
Tuner section
Frequency range, antenna – FM: 87.5 - 108.0 MHz,
Rod antenna, FM antenna terminal: 75 ohms
(unbalanced). AM: 530/531 - 1,710/1,602 kHz (10/9 kHz
step), AM loop antenna.
Deck section
Track format – 4 tracks, 2 channels / Frequency range
– Normal tape: 50 - 12,500 Hz (EIAJ) / Recording
system – AC bias / Erasing system – AC erase / Heads
– Recording/playback head (1), Erasure head (1)
CD player section
Disc – Compact disc / Scanning method – Non-contact
optical scanner (semiconductor laser)
General
Speaker – 100 mm cone type (2) / Output –
Headphones jack (stereo mini-jack) / Power output –
10 W + 10 W (EIAJ, 4 ohms, T.H.D. 10%) / Power
requirements – AC 120 V, 60 Hz / Power consumption –
40 W / Power consumption in standby mode – With
ECO mode on: 1.2 W, With ECO mode off: 9.4 W /
Dimensions (W
×
H
×
D) – 482
Ч
168
Ч
231 mm (19
Ч
6 5 /
8
Ч
9 1 /
8
in.) / Weight – 6.7 kg (14 lbs. 12 oz.) /
Accessories – Remote control (1), AC cord (1), AM loop
antenna (1)
Specifications and external appearance are subject to
change without notice.
COPYRIGHT
Please check the copyright laws relating to
recordings from disc, radio or external tape for the
country in which the machine is being used.
If an erroneous display or malfunction occurs
Turn off the unit and press POWER 6 STANDBY/ON
while pressing s .
If the unit cannot be reset in the way above, disconnect
the AC cord to turn off the display.
Leave the unit for a while and turn the power back on.