4software – Multichannel Systems Wireless-System Manual User Manual

Page 13

Advertising
background image

9

4

Software

4.1

Installing MC_Rack

The data acquisition computer with the MC_Rack program comes preinstalled and preconfigured
by MCS for a flawless operation. You should contact your local retailer for assistance if you want
to install additional hard- or software, or if you want to replace the computer, as incompatibilities
of hardware components or software settings with MC_Rack may occur.

Caution: You have acquired a high performance data acquisition and analysis computer. Do not
modify the system, do not install new hard- or software, or another operating system without
asking MCS or your local retailer for advice. Especially do not install virus scanners or firewalls
because these programs are known to interfere with the data transfer to the hard disk. MCS
cannot guarantee that a modified system is fully operational. Even data loss may occur.

System requirements

Software:

One of the following Microsoft Windows ® operating systems is required: Windows 7, Vista,
or XP (English and German versions supported) with the NT file system. Other language versions
may lead to software errors.

Hardware: System of implanted electrodes, headstage, receiver and interface box.

The Wireless-System. (Not required for offline analysis or demo mode). If no data acquisition
is present, MC_Rack opens in a simulation mode. A computer with low performance may lead
to performance limits more often; therefore, MCS recommends an up-to-date computer. Please
note that there are sometimes hardware incompatibilities of the Wireless-System and computer
components; or that an inappropriate computer power supply may lead to artifact signals.
Please contact your local retailer for more information on recommended computer hardware.

Important: You need to have installed the latest Wireless-System driver to operate the system,
which is automatically installed with MC_Rack. The installation may be invalid if the Wireless-
System does not respond. Please contact Multi Channel Systems or your local retailer in this case.

Advertising