Multichannel Systems Wireless-System Manual - Manual (Page 32)

Wireless System Manual
28
To Do Checklist before start working with a Wireless-System
in a new configuration:
1. Start the Wireless-System Config program. The main window opens.
2. When connecting more than one Wireless-System to the data acquisition computer the main
window appears twice or more. Please make sure that each system on one data acquisition
computer has a different frequency ID. Your Wireless-System(s) is / are now detected by
the Wireless-System Config tool. The serial number of your receiver(s) is / are displayed
in "Found Wireless-System S/N".
3. Choose your W-Type from the drop down menu, which possibly is already chosen.
4. Now please connect the first headstage to a battery. The headstage switches on, that means
the blue light flickers
Important: Configure only one headstage at a time!
6. Press "Select W4" to define the headstage as "A", "B", "C"; or "D" . This step determines
the frequency band of this particular headstage.
7. The established connection is indicated by the green color of the "Found" button.
8. Disconnect the first headstage, which is configured now. Connect the next headstage
and configure it either to the same Wireless-System (receiver) with the same frequency ID,
but to another frequency A, B, c or D. Or you connect the headstage to another Wireless-Systems
and perform the same procedure as described above.