Multichannel Systems Wireless-System Manual - Manual (Page 31)

Appendix
27
Click the button "Distribute default" to keep the "Frequency ID" in a line,
ID 1 to ID 4.
If you try to give the same frequency ID to different systems you get an error message.
"Frequency ID each ID must be different!". Please choose another ID.
When using a second data acquisition computer nearby to record from an additional wireless
systems, please make sure that the frequency IDs differ from each other. Otherwise the systems
will interfere.
To change the high pass filter, press the button "Change". The "Change High Pass" dialog
will open. Click the radio button of the desired frequency 0.1 Hz or 1 Hz. This information
will be permanently stored on the headstage.