Multichannel Systems MEA1060-Up-BC Manual - Manual (Page 13)

First Use of the MEA Amplifier
13
The command List Mode opens an additional window: List of Stimulation Patterns. In List
Mode you can download a list of up to 50 user defined stimulation patterns. The quantity of
50 patterns is hardware controlled. A stimulation pattern can contain single or multiple electrodes
and must get an user defined name. Click "New", and it appears in the small upper window pane.
Change "New" into your specific name for the actual pattern, click "Update" to confirm
the name and add the pattern to the list. By clicking the button Trace List, the stimulation
patterns in this list are applied one after the other as stimulation signals.
Note: A Firmware update is necessary to use this feature.
Please read chapter "Stimulation" for more information.
It is very convenient to use a stimulus generator and MC_Stimulus to set up both your stimuli
and the blanking signal. You can then use the digital Sync Out output channel for controlling
the blanking of the MEA preamplifier and triggering the recording with the MC_Card or an
USB based data acquisition device.